Security Brands 27-220HID Edge E2 Smart Prox Reader

HID Proximity Access Control for Gates and Doors

The Security Brands 27-220HID Edge E2 is a smart HID prox reader and stand-alone access control unit for gated entrances, doors, parking areas, and controlled perimeter access points. It uses the Edge E2 platform with Bluetooth administrator app management, onboard relay control, and local programming through the included internal programming pad.

The 27-220HID can operate without a separate access controller. It stores credentials, checks user permissions and schedules, then activates Relay A or Relay B when an approved HID credential, transmitter, remote, vehicle tag, or connected Wiegand device is accepted. This makes it useful for single-entry locations or two controlled openings where the HID reader and access controller are needed at the same entry point.

For larger properties, the Edge family also supports a controller-based layout. The Security Brands Edge E4 27-240 is the dedicated controller option for installations where separate Wiegand readers, keypads, or access devices are wired back to a controller. The 27-220HID is the all-in-one HID smart prox reader option, while the Edge E4 is better suited when the system design calls for separate reader placement and centralized relay control.

In a typical gate installation, the 27-220HID is powered by the included 12-VDC power supply or a compatible 12 to 24VAC/DC source. Relay A is commonly wired from N/O and COM to the gate operator’s open, radio, access, or similar input and common terminal. Relay B can be wired the same way to a second gate, door, lock control circuit, or access device. Exact terminal names vary by operator, so the gate operator or door opener wiring diagram should always be followed.

Key Features

• Smart HID prox reader and stand-alone access controller
• Security Brands model 27-220HID Edge E2
• HID reader version of the Edge E2 smart card reader platform
• Operates without a separate controller for stand-alone gate or door access
• Controls up to 2 gates, doors, or access points
• Relay A and Relay B outputs for direct connection to gate operators, door openers, locks, or control circuits
• Bluetooth connection for local administrator app management
• Edge Smart Keypad app available for iOS and Android administrator use
• Direct programming through the included internal programming pad
• 26-bit Wiegand protocol support
• One available external Wiegand input for compatible access devices
• 2 event inputs for request-to-exit and related input functions
• 2 digital inputs for accessory input functions
• Dual 365-day timers, one for each relay
• Supports 7-day, holiday, and special-event timer functions
• Configurable user permissions for credentials and connected reader devices
• Event reports with CSV export
• Anti-passback support
• Random code generation
• Firmware updates through the app when available
• Stainless-steel faceplate
• Powder-coated steel enclosure
• Made in the USA from global materials

Technical Specifications

• Manufacturer: Security Brands
• Model / Part Number: 27-220HID
• Product Family: Edge E2
• Product Type: Smart HID prox reader and stand-alone access controller
• Reader Version: HID card reader variant
• Access Control Type: Local stand-alone access control with onboard relays
• Separate Controller Required: No for stand-alone operation
• Edge Family Controller Option: Security Brands Edge E4 27-240, used when separate Wiegand readers or keypads need to wire back to a controller
• Cloud / Cellular Control: No
• Administrator App: Edge Smart Keypad app
• App Connection: Bluetooth
• Direct Programming: Included internal programming pad
• Controlled Openings: Up to 2 gates or doors
• Relay Outputs: Relay A and Relay B
• Relay Contact Rating: 10A at 120VAC / 24VDC
• Typical Gate Wiring: Relay N/O and COM to gate operator open, radio, access, or similar input and common
• Second Device Wiring: Relay B can be wired to a second gate, door, lock control circuit, or controlled device
• Wiegand Protocol: 26-bit Wiegand
• Wiegand Inputs: 2 total on the Edge E2 platform
• Onboard Reader Note: One Wiegand input is used by the built-in proximity card reader
• Available External Wiegand Input: 1
• External Wiegand Wiring: Wiegand 2 terminals are shown for a compatible Wiegand device
• Wiegand Device Wiring: +12V, GND, Data 0, Data 1, LED 1, and LED 2 terminals shown in manual
• Wiegand Direction Note: Manufacturer documentation lists Wiegand input for the 27-220 platform; do not treat it as a universal Wiegand-output slave reader unless confirmed for the specific controller design
• Event Inputs: 2
• Digital Inputs: 2
• Event Input Uses: Request-to-exit, log mode, remote open, remote open and log, arming circuit, and remote operation modes where configured
• Timers: Dual 365-day timers, one per relay
• Additional Timer Functions: 7-day timers, holiday timers, and special-event timers
• Limited-Use Access: Use-based, 7-day, and 365-day restrictions supported
• Anti-Passback: Supported
• Reports: Event reports with CSV export
• Firmware Updates: Via app when available
• Input Power: 12 to 24VAC/DC listed on spec sheet
• Included Power Supply: PS-12DC1 12-VDC power supply
• Current Draw at 12VDC: Less than 111 mA with one relay latched and LED components on
• Current Draw at 24VDC: Less than 60 mA with one relay latched and LED components on
• Dimensions: 6.21 in. H x 7.44 in. W x 5.25 in. D
• Shipping Weight: 8 lb.
• Operating Temperature: -15°F to 158°F
• Faceplate: Stainless steel
• Enclosure: Powder-coated steel
• Included Components: Edge E2 unit, programming pad, key, four carriage bolts, four hex nuts, and PS-12DC1 power adapter
• Mounting Style: Post / pedestal mount
• Intercom Note: This model does not include an intercom; Edge E2 intercom version is available separately
• Safety Note: Reversing or other safety devices should always be used on automatic gate systems
• Warranty: Two-year limited warranty

Conclusion

The Security Brands 27-220HID Edge E2 is the HID smart prox reader version of the Edge E2 access control platform. It can function as a stand-alone card-based entry system for up to two gates or doors by wiring its relays directly to gate operators, door openers, locks, or control circuits. For larger Edge family layouts that need separate readers wired back to a controller, the Security Brands Edge E4 27-240 is the controller option to consider.