Linear MTS1 Remote Control
Linear MTS-1 Visor Transmitter 1 Channel
Stylish small-form-factor, low-profile Remote controls one MegaCode receiver and can be attached to your car’s visor. This remote replaces the previous MCT1 model.
The 1 and 3 button remote controls are wireless. The MTS1 and MTS3 are 1 and 3 button MegaCode remote controls designed to be used with Linear garage door and gate operators and MegaCode remote receivers. Each of the remote control buttons will send a unique code when pressed. One button can be used to activate the individual’s garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator.
MegaCode Remote controls and receivers do not contain a typical “coding switch”. Each remote control is permanently coded at the factory. The receiver is programmed by “learning” a remote control’s unique digital code. The receiver will activate only from the “memorized” transmitters.
The remote control is powered by a Type CR2032 “coin-cell” battery. The battery should last at least 1 year with normal use. The indicator light on the remote control will glow when the unit is activated. If the indicator lights dimly, or not at all when transmitting, the battery needs to be replaced. To conserve battery life, an internal timer limits the transmission duration to 20 seconds if a remote control button is held down.
- Activates one MegaCode receiver
- Test/operate LED
- Visor mounting clip supplied
- Visor clip mounts vertical or horizontal
- 1,000,000+ Codes
- Also known as Linear part number DNT00091