FAAC S450H Dual Hydraulic Swing Gate Operator Kit

Hydraulic Dual Swing Gate Automation Kit for Residential and Commercial

The FAAC S450H Dual Hydraulic Swing Gate Operator Kit is built to automate dual swing gates at secured residential and controlled-access driveways where smooth movement, consistent holding force, and reliable safety logic matter. This dual configuration pairs two 24V electro-hydraulic operators with the E024U control platform, using integrated encoder feedback for position control and obstacle response while supporting monitored entrapment protection devices required for UL 325 compliant installations.

Key Features

• Dual-leaf automation using two S450H electro-hydraulic operators for synchronized swing gate control
• Hydraulic drive performance with integrated pump and cylinder assembly inside an anodized aluminum housing
• Integrated encoder feedback for operator position management through the E024U system
• Reverse-on-contact safety behavior managed by the E024U control logic to reduce entrapment risk when an obstruction is detected
• Battery backup capability via the E024U platform to maintain controlled access operation during power loss (when batteries are installed)
• CBAC vs SB locking options: CBAC includes hydraulic locks; SB does not and may require a site-appropriate lock depending on gate design and conditions
• Included mechanical stops for opening and closing, supporting stable end-of-travel control

Technical Specifications

• Operator Type: Electro-hydraulic swing gate operator
• Input Voltage: 24 Vdc
• Power: 60 W
• Max Thrust: 1124 lbf (500 daN)
• Rod Stroke: 12.2 in (311 mm)
• Minimum Time to Open 90°: 12 sec
• Maximum Leaf Width: 14 ft (CBAC) or 17 ft (SB)
• Maximum Leaf Weight: 1100 lb (500 kg)
• Use Frequency: Continuous
• Protection Class: IP55
• Operating Temperature: -4°F to +131°F (-20°C to +55°C)
• Operator Dimensions: 43.8 x 3.3 x 4.7 in (1113 x 85 x 119 mm)
• Operator Weight: 14.3 lb (6.5 kg)

Conclusion

For dual swing gates that need dependable hydraulic performance and modern safety logic, the FAAC S450H Dual Kit provides a low-voltage platform centered on encoder-based control and UL 325 aligned operation through the E024U system. Elite recommends confirming gate geometry, mounting dimensions, and whether CBAC locking or an external lock is required for your specific gate design before ordering.