EMX VMD202 VEHICLE MOTION SENSOR 100FT LEAD
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
EMX VMD202 Exit Sensor W/ 100ft Lead Wire
The VMD202 is the most advanced single-piece vehicle motion detector on the market today. The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202 vehicle motion detector accepts a wide range of power inputs. If used in a location without power, one 9V battery will power the VMD202 for six months. The low standby current of 250uA is great for solar power applications.
The VMD202-R Sensitivity Remote Control makes installation and fine tuning simple.You can program the VMD202 vehicle motion detector’s 10 sensitivity settings with the VMD202-R Sensitivity Remote Control. Simply plug the VMD202-R into the harness to tune the VMD202. The setting is retained in non-volatile memory. The VMD-R can be removed and used for multiple installations, or left in place if tampering is not a concern.
The VMD202 vehicle motion detector is supplied with a 100-ft. lead, a harness and a jumper.
Features
- 100ft lead wire
- Wide power supply options 6-41 VDC or 6-29 VAC
- Probe assembly and wire are water tight and direct burial compatible
- Harness is pre-wired onto lead wire for easy installation
- Settings are placed in a non-volatile memory in case of power failure
- Accepts wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
- Low current consumption of 250uA standby and 12mA activated
- Kit includes VMD202-JMPR (jumper) & VMD202-HAR (harness)

EMX VMD202 VEHICLE MOTION SENSOR 100FT LEAD
EMX VMD202 Exit Sensor W/ 100ft Lead Wire
The VMD202 is the most advanced single-piece vehicle motion detector on the market today. The probe and its electronics are housed in a slim design that is buried next to a driveway.
The VMD202 vehicle motion detector accepts a wide range of power inputs. If used in a location without power, one 9V battery will power the VMD202 for six months. The low standby current of 250uA is great for solar power applications.
The VMD202-R Sensitivity Remote Control makes installation and fine tuning simple.You can program the VMD202 vehicle motion detector’s 10 sensitivity settings with the VMD202-R Sensitivity Remote Control. Simply plug the VMD202-R into the harness to tune the VMD202. The setting is retained in non-volatile memory. The VMD-R can be removed and used for multiple installations, or left in place if tampering is not a concern.
The VMD202 vehicle motion detector is supplied with a 100-ft. lead, a harness and a jumper.
Features
- 100ft lead wire
- Wide power supply options 6-41 VDC or 6-29 VAC
- Probe assembly and wire are water tight and direct burial compatible
- Harness is pre-wired onto lead wire for easy installation
- Settings are placed in a non-volatile memory in case of power failure
- Accepts wide range of power inputs from 9 – 41 VDC or 6 – 29 VAC
- Low current consumption of 250uA standby and 12mA activated
- Kit includes VMD202-JMPR (jumper) & VMD202-HAR (harness)
