EMX ULTRA-PLG Plug-In Loop Detector
EMX Ultra-PLG Loop Detector
The ULTRA-PLG vehicle loop detector combines small size with full-featured functionality in a plug-in module. This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.The ULT-PLG provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. Our latest vehicle detector provides options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.This detector is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™. Ten sensitivity settings allow for finer adjustment of the detection level. The four frequency selections help to prevent crosstalk in multi-loop applications.
FEATURES
- ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
- Frequency count/reset switch
- 10 sensitivity settings
- 4 operating frequencies
- Solid-state output
- Second output, pulse entry/exit, normal/infinite presence
- CE compliant
- DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
- Plug-in style vehicular loop detector
- Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
- Low current draw – green product
- Easy to install and setup with the ULTRAMETER™ sensitivity display
- Compatible with many gate operators
- Cost effective
Sensitivity | 10 levels, 0-9 |
UltraMETER™ display |
Indicates optimum sensitivity level, 0-9 diagnostic aid
|
Loop frequency |
4 settings (low, med-low, med-hi, high)
|
Loop inductance |
20…2000µH (Q factor > 5)
|
Grounded loop |
Isolation transformer allows operation with poor quality loops
|
Automatic tuning |
Detector tunes to loop on power-up and following frequency count function
|
Environmental tracking |
Automatic compensation
|
Surge protection |
Loop circuitry protected by surge suppressors
|
Detect output |
Solid-state (open collector)
|
Output B |
Solid-state (open collector)
|
Output B inverted |
Solid-state (open collector)
|
Power / loop fault indicator | Green LED |
Detect / frequency count indicator | Red LED |
Detect-on-Stop |
Requires vehicle to stop for a minimum of 1 second (1-2s typical)
|
ASB (Automatic Sensitivity Boost) |
Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
|
Power | 12VDC…24VDC |
Operating current | 15 mA |
Operating temperature |
-40°C…82°C (-40°F…180°F) 0…95% relative humidity
|
Dimensions (L x W x H) |
3.0”(76mm) x 0.9”(22mm) x 2.75”(70mm)
|
Weight | 0.15 lbs. (68 g) |
Connector | 10-pin female |