EMX ULTRA-MVP LOOP DETECTOR
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
EMX Ultra-MVP Loop Detector
Discontinued. Please see:
https://elitegates.net/products/emx-mvp-d-tek-loop-detector
Multi-voltage vehicle loop detector; Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature; Fits into small operator housings, saving space; Easy to install and setup with the ULTRAMETER™ sensitivity display; Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
FEATURES
- Single or dual channel unit for US or EU wiring
- ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
- 10 sensitivity settings
- 4 operating frequencies
- Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
- Small size: 73 x 38 x 78mm
- Socket mount -11 pin (JEDEC B11-88)
- CE compliant
- DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
| Sensitivity | 10 levels, 0-9 |
| ULTRAMETER™ Display |
Indicates optimum sensitivity level, 0-9 Diagnostic aid
|
| Loop frequency |
4 settings (low, med-low, med-hi, high)
|
| Loop inductance |
20…2000µH (Q factor > 5)
|
| Grounded loop |
Isolation transformer allows operation with poor quality loops
|
| Automatic tuning |
Detector tunes to loop on power-up and following frequency count function
|
| Environmental tracking |
Automatic compensation
|
| Surge protection |
Loop circuitry protected by surge suppressors
|
| Presence relay |
SPDT relay contacts (form C)
|
| Output B relay |
SPDT relay contacts (form C)
|
| Contact rating (resistive load) |
2A @ 30VDC, 0.5A @ 125VAC
|
| Power / loop fault indicator | Green LED |
| Detect / frequency count indicator | Red LED |
| Detect-On-Stop |
Requires vehicle to stop for a minimum of 1 second (1-2s typical)
|
| ASB (Automatic Sensitivity Boost) |
Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
|
| Power |
12…60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)
|
| Operating current |
20mA standby / 50mA detect
|
| Operating temperature |
-40°C…82°C (-40°F…180°F) 0…95% relative humidity
|
| Dimensions (L x W x H) |
73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
|
| Weight | 0.25 lbs. (113 g) |
| Housing |
ABS plastic, IP30
|
| Connections |
Socket mount – 11 pin male (JEDEC B11-88)
|
EMX ULTRA-MVP LOOP DETECTOR
EMX Ultra-MVP Loop Detector
Discontinued. Please see:
https://elitegates.net/products/emx-mvp-d-tek-loop-detector
Multi-voltage vehicle loop detector; Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature; Fits into small operator housings, saving space; Easy to install and setup with the ULTRAMETER™ sensitivity display; Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
FEATURES
- Single or dual channel unit for US or EU wiring
- ULTRAMETER™ displays optimum sensitivity setting/crosstalk interference
- 10 sensitivity settings
- 4 operating frequencies
- Automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence
- Small size: 73 x 38 x 78mm
- Socket mount -11 pin (JEDEC B11-88)
- CE compliant
- DETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loop
| Sensitivity | 10 levels, 0-9 |
| ULTRAMETER™ Display |
Indicates optimum sensitivity level, 0-9 Diagnostic aid
|
| Loop frequency |
4 settings (low, med-low, med-hi, high)
|
| Loop inductance |
20…2000µH (Q factor > 5)
|
| Grounded loop |
Isolation transformer allows operation with poor quality loops
|
| Automatic tuning |
Detector tunes to loop on power-up and following frequency count function
|
| Environmental tracking |
Automatic compensation
|
| Surge protection |
Loop circuitry protected by surge suppressors
|
| Presence relay |
SPDT relay contacts (form C)
|
| Output B relay |
SPDT relay contacts (form C)
|
| Contact rating (resistive load) |
2A @ 30VDC, 0.5A @ 125VAC
|
| Power / loop fault indicator | Green LED |
| Detect / frequency count indicator | Red LED |
| Detect-On-Stop |
Requires vehicle to stop for a minimum of 1 second (1-2s typical)
|
| ASB (Automatic Sensitivity Boost) |
Increases sensitivity after initial detection to prevent dropout due to high-bed vehicles
|
| Power |
12…60 VDC (Max. 0.8 VA) 12…240 VAC (48…62Hz) (Max. 1.4 VA)
|
| Operating current |
20mA standby / 50mA detect
|
| Operating temperature |
-40°C…82°C (-40°F…180°F) 0…95% relative humidity
|
| Dimensions (L x W x H) |
73mm (2.9”) x 38mm (1.2”) x 78mm (3.1”)
|
| Weight | 0.25 lbs. (113 g) |
| Housing |
ABS plastic, IP30
|
| Connections |
Socket mount – 11 pin male (JEDEC B11-88)
|
