EMX NIR-50-325 Retroreflective Monitored Photoeye (UL)
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
EMX Monitored Photocell With Reflector (UL)
The NIR-50-325 is an extended range, retroreflective photoeye sensor providing entrapment protection for overhead doors, gates and barriers. The NIR-50-325 is UL325-2018 compliant and features an internal 10K resistor for monitored operation. Its flexible voltages, compact design and LED indicators make this photoeye easy to install.
The NIR-50-325 kit includes: photoeye with hood, reflector with hood, and mounting bracket with hardware.
This retroreflective photoeye is not compatible with operators that use NO and COM (non-10K) monitoring methods.
Specifications
- Retroreflective configuration
- NC and 10K monitoring
- 50 ft. operating range
- Sensitivity adjustment
- Wide range operating voltage
- IP66 enclosure
- UL325-2018 complaint
- Flexible voltage: 12 – 240 VDC, 24 – 240 VAC
- Watertight package for reliable outdoor installation
- Operating range: 50 feet
- Lead wire: 6 feet
- 2 LED indicators
- Sensitivity adjustment
- Compact size: 2.5″ high, 1.5″ deep, 0.75″ wide
EMX NIR-50-325 Retroreflective Monitored Photoeye (UL)
EMX Monitored Photocell With Reflector (UL)
The NIR-50-325 is an extended range, retroreflective photoeye sensor providing entrapment protection for overhead doors, gates and barriers. The NIR-50-325 is UL325-2018 compliant and features an internal 10K resistor for monitored operation. Its flexible voltages, compact design and LED indicators make this photoeye easy to install.
The NIR-50-325 kit includes: photoeye with hood, reflector with hood, and mounting bracket with hardware.
This retroreflective photoeye is not compatible with operators that use NO and COM (non-10K) monitoring methods.
Specifications
- Retroreflective configuration
- NC and 10K monitoring
- 50 ft. operating range
- Sensitivity adjustment
- Wide range operating voltage
- IP66 enclosure
- UL325-2018 complaint
- Flexible voltage: 12 – 240 VDC, 24 – 240 VAC
- Watertight package for reliable outdoor installation
- Operating range: 50 feet
- Lead wire: 6 feet
- 2 LED indicators
- Sensitivity adjustment
- Compact size: 2.5″ high, 1.5″ deep, 0.75″ wide
