DoorKing 9000-015 Post Mount Kit for Model 9000

Post Mount Base Plate Kit for DoorKing 9000 Slide Gate Operators

The DoorKing 9000-015 Post Mount Kit is designed specifically for Model 9000 slide gate operators when you need a clean, elevated post-style installation with organized conduit routing. The base plate mounts into a poured concrete foundation, and the posts thread into the plate to help keep wiring paths structured and easier to service. Conduit can be routed inside the posts as recommended, or flexible conduit can be run after the operator has been installed.

Key Features

• Model-specific fit: Designed for DoorKing Model 9000 slide gate operators only
• Post mount foundation: Base plate mounts into poured concrete for a secure install
• Conduit-friendly layout: Supports routing conduit inside the posts for a cleaner wiring path
• Installation guidance built-in: Base plate must be level and positioned at least 1 inch from the gate frame

Technical Specifications

• Part Number: 9000-015
• Application: Post mount kit for DoorKing Model 9000 slide gate operators
• Minimum concrete foundation size: 14 inches x 23 inches
• Operator clearance guidance: Operator should be a minimum of 4 inches above ground
• Recommended foundation depth: 18 inches minimum (reinforced concrete recommended)
• Conduit notes: Use sweeps (not elbows); do not run low-voltage wiring in the same conduit as high-voltage wiring

Kit Contents

• Base Plate: Ensures a stable foundation for the gate operator
• 2 Posts: Provide structural support and a path for routing conduit/wiring
• 6 Bolts, Lockwashers, and Nuts: Hardware for attaching the operator to the base plate
• 12 Washers: Additional mounting hardware for securing components

Conclusion

The DoorKing 9000-015 Post Mount Kit is the correct mounting solution when a Model 9000 installation calls for a post-and-plate foundation setup and more organized conduit routing. Verify placement and conduit planning in your DoorKing documentation before installation.