DoorKing 1815-294 AWID Proximity Reader - Flush Mount

Flush Mount AWID Proximity Reader w/ Integrated Tracker Board

The DoorKing 1815-294 is a flush mount access control unit combining a built-in AWID proximity card reader with an integrated DoorKing tracker expansion board in a stainless steel lockable enclosure. Designed for clean, recessed wall installations at gates, doors, and secured entry points, the 1815-294 provides a self-contained credential reading and access control solution compatible with DoorKing 1830 series access control systems including models 1833, 1835, 1837, and 1838. The key-locked enclosure door protects internal components from tampering and unauthorized access. The integrated tracker expansion board communicates with the access control system via hardwired communication line, enabling the unit to manage an individual access point within a multi-door or multi-gate system. Must be installed inside a controlled, protected, or restricted area to comply with UL 294 certification requirements.

Key Features

• Flush mount stainless steel enclosure with key-locked door for tamper-resistant installation
• Built-in AWID proximity card reader for contactless credential reading
• Integrated DoorKing 2358-010 tracker expansion board for access point management
• Compatible with DoorKing 1830 series access control systems (1833, 1835, 1837, 1838)
• Hardwired communication line connects to access control system relay 2/wiegand 2 or relay 1/wiegand 1
• Supports 26, 30, and 31-bit Wiegand access control devices
• Three programmable relay outputs for door strike, alarm, and auxiliary functions
• Request to exit input for free egress without triggering alarm condition
• Door ajar monitoring input for forced entry and hold-open detection
• Conforms to UL STD 294 and certified to CAN/ULC-S319-05
• Verify compatibility with your specific access control system model before ordering

Technical Specifications

• Part Number: 1815-294
• Enclosure: Flush mount stainless steel with key-locked door
• Reader Type: Built-in AWID proximity card reader
• Tracker Board: DoorKing 2358-010 (Rev O or higher)
• Compatible Systems: DoorKing 1833, 1835, 1837, 1838 multi-door access controllers
• Wiegand Input: 26, 30, 31-bit Wiegand format
• Communication: Hardwired to relay 2/wiegand 2 or relay 1/wiegand 1 at access control system
• Relay Outputs: Output relay, alarm relay, auxiliary relay (each configurable NO or NC)
• Board Power: 16.5 VAC, 20 VA required
• Certification: Conforms to UL STD 294, certified to CAN/ULC-S319-05
• Installation: Must be installed in a controlled, protected, or restricted area per UL 294
• Manufacturer: DoorKing
• Condition: New, genuine OEM part

Conclusion

The DoorKing 1815-294 provides a flush mount, tamper-resistant access control solution with a built-in AWID proximity reader and integrated tracker expansion board for DoorKing 1830 series systems. Confirm compatibility with your specific access control system model and verify hardwire run distances and board address requirements before ordering. Refer to DoorKing installation manual P/N 2358-065 for complete wiring and programming instructions.