Cartell CW-SYS Wireless Loop
Cartell CW-SYS Wireless Loop System
Download Specs Download Manual
A wireless vehicle detection system for gates/home automation systems, triggered when a vehicles approaches the devise. This sensor can be installed in the driveway, beside the driveway, or on a post adjacent to the drive.
Powered by magnetometer technology with a sensitivity adjustment. It is only tripped by moving steel—not motion, heat, or pressure. No false alarm. Redundant two-way radio at 915MHz guarantees signal reaches the receiver.
Features
- Installs in under 1 hour (on average) without the need for trenching
- No external transmitter/antenna
- Install sensor above ground on immovable object; in the ground; or in driveway
- Easily pair multiple sensors with multiple Integrators
- Reliable circuitry and filtering
- IP Rating: 68· Strength: 9-tons (8514 kgf)
- LoRA radio protocol at 915MHz
- Range determined by installation and obstructions to radio signal transmission
- Tested above ground: line of site, no obstructions, up to 2,500 feet (762 m)
- Tested flush with ground: line of site, no obstructions, up to 1,000 feet (305 m)
- 1-3 year battery life: CR123A (2)
- Sensor standby: 22 microamps (µA)
- Extra relay for low battery signal
- Short driveways: install in middle of the driveway and turn down sensor sensitivity
- Wide driveways: install multiple units in driveway (12 ft. apart) or on both sides
Components
- Sensor puck
- Receiver
- Auger screws
- Batteries & clips
- Coaxial cable
- Terminal block screwdriver
