Liftmaster K76-34644 Aps Encoder

LiftMaster K76-34644 APS Encoder 24 Volt

The LiftMaster K76-34644 APS Encoder is a 24V replacement encoder designed specifically for compatibility with various LiftMaster® ELITE commercial swing gate operators. Equipped with an Absolute Position Sensor (APS), this encoder accurately determines the precise location of your operator arm, facilitating precise start/stop calibration.

Installation of the LiftMaster K76-34644 APS Encoder is simple. Follow these steps:

1. Turn off the power: Ensure that the power to your gate operator is switched off to prevent any accidents.
2. Gather tools: Collect basic tools such as a screwdriver, plier etc.
3. Identify the designated area on your gate operator where the encoder will be mounted, referring to the gate operator’s manual or replacement parts diagram for guidance.
4. The LiftMaster K76-34644 APS Encoder comes with pre-drilled bolt holes for easy installation.
5. Align the encoder with the mounting area and use included screws/bolts to secure it in place.
6. Connect the wiring from the encoder to the gate operator control board, following the color-coded instructions provided in the manual.
7. After securely mounting the encoder, turn on the power to your gate operator.
8. Calibrate the start and stop positions using the on-board buttons
9. Test the gate operator to verify that the encoder is functioning correctly, ensuring smooth gate operation and accurate stopping positions.

Before ordering, check the manual or replacement parts diagram for specific part information to ensure compatibility.

K76-34644 APS encoder is a genuine LiftMaster® replacement part.