HySecurity SlideDriver 80 (Heavy Gate) Slide Gate Operator
HySecurity SlideDriver 80 Slide Gate Operator
***Made-to-order item. Call for latest price***
Please allow 3-6 weeks for unit to arrive in our warehouse
HySecurity's powerful two-wheel drive, hydraulic slide gate operator is designed for VERY heavy or long gates. Cycle up to 8,000 lb gates at 1 ft/s (3,629 kg / 30 cm/s). The SlideDriver 80 is equipped with an AdvanceDrive wheel that runs on the top of the drive rail and an XtremeDrive™ wheel which engages a rack on the underside of the drive rail. This increases the pull force for large heavy industrial and high security gates.
Listed and restricted to UL 325 usage class III, IV.
To enable fully automatic operation, all SLIDE gate operators require a minimum of TWO monitored external entrapment protection sensors (one for each direction) to protect entrapment zones in both the open and close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.
|Travel Speed||1 ft/s (30 cm/s)|
|Gate Length||Limited only by weight|
|Gate Capacity||up to 8,000 lb (3,629 kg)|
|Operator HP||2 hp|
|Pull Force||600 lb (272 kg)|
|Optional UPS||See SlideDriver 80 UPS|
|Single Phase Voltages||208/230V 60Hz; 220V 50Hz*|
|Optional Three Phase Voltages||208/230/460V or 575V* 60Hz; 220/380/440V 50Hz*|
|Temperature Rating||-40° to 158° F (-40° to 70° C) No heater necessary|
|Communication||RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory|
|User Controls||Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software.|
|Relays||Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs|
|App Class||Usage Class III, IV|
|Finish Type||Zinc plated with powder coating|