HySecurity SlideDriver 50VF2/3 Slide Gate Operator
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Gooseneck & Pedestals
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Smart Gates Devices
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
HySecurity SlideDriver 50VF2/3 Slide Gate Operator
***Made-to-order item. Call for latest price***
Please allow 3-6 weeks for unit to arrive in our warehouse
Field adjustable Open/Close speeds are 2.2 or 3 ft/s. Emergency Fast Operate at 3 ft/s. Cycle up to 5,000 lb gate of any length at 2.2 or 3 ft/s (2,268 kg / 70 or 91 cm/s). Move a heavy gate SMOOTHLY and FAST. These operators close gates to a precise point and are extremely easy on gate hardware. SlideDriver VF operators use a variable frequency drive, 8 inch wheels - both wheels driven, and a high flow rate pump to move gates weighing up to 5,000 lb at high speed.
SlideDriver is a powerful, industrial hydraulic slide gate operator that secures industrial and crash sites worldwide. This rugged, continuous duty operator is renowned for decades long life and low maintenance.
To enable fully automatic operation, all SLIDE gate operators require a minimum of TWO monitored external entrapment protection sensors (one for each direction) to protect entrapment zones in both the open and close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.
Operator Specs:
| Duty Cycle | Continuous |
| Travel Speed | Field adjustable, 2.2 ft/s (70 cm/s) or 3 ft/s (91 cm/s). Emergency Fast Operate 3 ft/s (91 cm/s) |
| Gate Length | Limited only by weight |
| Gate Capacity | up to 5,000 lb (2,268 kg) |
| Operator HP | 2 hp |
| Drive Type | Hydraulic |
| Pull Force | 300 lb (136 kg) |
| Optional UPS | 230V AC Power Supply w/HyInverter AC™ provides up to 3,000 ft (914 m) of gate travel after AC power loss.* |
| Single Phase Voltages | 208/230V 60/50Hz |
| Three Phase Voltages | 208/230V 60/50Hz or 380/460V 60/50Hz |
| Temperature Rating | -40° to 158° F (-40° to 70° C) No heater necessary. |
| Communication | RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory |
| User Controls | Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. |
| Relays | Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs |
| App Class | Usage Class III, IV |
| Finish Type | Zinc plated with powder coating |
| Warranty | 5 year |
HySecurity SlideDriver 50VF2/3 Slide Gate Operator
HySecurity SlideDriver 50VF2/3 Slide Gate Operator
***Made-to-order item. Call for latest price***
Please allow 3-6 weeks for unit to arrive in our warehouse
Field adjustable Open/Close speeds are 2.2 or 3 ft/s. Emergency Fast Operate at 3 ft/s. Cycle up to 5,000 lb gate of any length at 2.2 or 3 ft/s (2,268 kg / 70 or 91 cm/s). Move a heavy gate SMOOTHLY and FAST. These operators close gates to a precise point and are extremely easy on gate hardware. SlideDriver VF operators use a variable frequency drive, 8 inch wheels - both wheels driven, and a high flow rate pump to move gates weighing up to 5,000 lb at high speed.
SlideDriver is a powerful, industrial hydraulic slide gate operator that secures industrial and crash sites worldwide. This rugged, continuous duty operator is renowned for decades long life and low maintenance.
To enable fully automatic operation, all SLIDE gate operators require a minimum of TWO monitored external entrapment protection sensors (one for each direction) to protect entrapment zones in both the open and close direction of travel. Visit www.hysecurity.com/gatesafety for more information on UL 325 standards and gate safety.
Operator Specs:
| Duty Cycle | Continuous |
| Travel Speed | Field adjustable, 2.2 ft/s (70 cm/s) or 3 ft/s (91 cm/s). Emergency Fast Operate 3 ft/s (91 cm/s) |
| Gate Length | Limited only by weight |
| Gate Capacity | up to 5,000 lb (2,268 kg) |
| Operator HP | 2 hp |
| Drive Type | Hydraulic |
| Pull Force | 300 lb (136 kg) |
| Optional UPS | 230V AC Power Supply w/HyInverter AC™ provides up to 3,000 ft (914 m) of gate travel after AC power loss.* |
| Single Phase Voltages | 208/230V 60/50Hz |
| Three Phase Voltages | 208/230V 60/50Hz or 380/460V 60/50Hz |
| Temperature Rating | -40° to 158° F (-40° to 70° C) No heater necessary. |
| Communication | RS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory |
| User Controls | Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software. |
| Relays | Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs |
| App Class | Usage Class III, IV |
| Finish Type | Zinc plated with powder coating |
| Warranty | 5 year |
