Platinum Access ACTP715-SK Swing Gate Operator Kit

Linear Swing Gate Automation with Battery Backup and Solar Capability

The Platinum Access ACTP715-SK Single Swing Gate Operator Kit is a linear actuator system designed for residential and commercial vehicular swing gates. It supports gates up to 700 lb and 15 ft long, with a maximum opening angle of 120 degrees and approximately 21-25 second travel time for a 90-degree opening.

The ACTP715 uses a 24 VDC continuous-duty brushed motor controlled by Platinum Access's GOC-4000 board. Built-in electronic reversing, soft start and soft stop, adjustable limits, and an automatic close timer provide the core gate-control functions, while two 12V 7Ah batteries provide 24 VDC backup operation during an AC power outage.

The system accepts 115/230 VAC single-phase power and can also be configured for solar operation with the appropriate solar regulator and properly sized solar panels. The ACTP715-SK is the single-gate configuration, combining one actuator arm with the control enclosure and battery-backed controller.

Key Features

• Single linear actuator kit for one vehicular swing gate
• Supports gates up to 700 lb and 15 ft long
• 24 VDC continuous-duty brushed motor
• Approximately 21-25 second travel time for a 90° opening
• Maximum gate opening angle up to 120°
• GOC-4000 control board with input/output LEDs
• Built-in electronic reversing sensor with adjustable sensitivity
• Soft start and soft stop for controlled gate movement
• Precision open and close limit switches
• Built-in 24 VDC battery backup with two 12V 7Ah batteries
• Adjustable automatic-close timer
• Keyed manual release for manual gate operation
• Supports both pull-to-open and properly configured push-to-open installations
• Primary/secondary capability allows expansion to a dual swing gate system
• Adjustable leaf delay available for dual-gate applications
• Advanced magnetic lock control
• Loop detector and external access-control connections
• Selectable fail-safe, fail-secure, and automatic-open-on-power-failure operation
• Optional solar operation with properly sized solar equipment
• Surge protection and alarm reset functions
• Charcoal gray powder-coated control enclosure
• ETL listed and compliant with UL 325 and UL 991 requirements

Technical Specifications

• Manufacturer: Platinum Access Systems
• Model: ACTP715-SK
• Operator Series: ACTP715
• Product Type: Single linear swing gate operator kit
• Application: Vehicular swing gates
• Maximum Gate Weight: 700 lb
• Maximum Gate Length: 15 ft
• Maximum Opening Angle: 120°
• 90° Opening Time: Approximately 21-25 seconds
• Motor Type: Brushed DC
• Motor Voltage: 24 VDC
• Motor Duty: Continuous duty
• Motor Operation: Instant reversing
• Control Board: Platinum Access GOC-4000
• Main Power Input: 100-240 VAC
• Selectable AC Input: 115/230 VAC, single phase
• Published Power Requirement: 120 VAC at 2 A or 220 VAC at 1 A
• Battery Backup: Built-in 24 VDC
• Included Batteries: 2 x 12V 7Ah
• Operating Temperature: -4°F to 158°F (-20°C to 70°C)
• Auto-Close Timer: Adjustable
• Obstruction Detection: Electronic reversing sensor built into the control board
• Limit System: Precision mechanical limit switches
• Manual Release: Key release
• Primary/Secondary Capability: Yes, with compatible secondary actuator
• Solar Capability: Optional
• Solar Requirement: Minimum 80W solar capacity with appropriate Platinum Access solar regulator
• Actuator Weight: Approximately 40 lb
• Actuator Length: Approximately 41 in
• Control Box Dimensions: Approximately 15.5 in H x 14.5 in W x 6.5 in D
• Control Box Weight: Approximately 28 lb with supplied batteries
• Control Box Location: Must be mounted within 5 ft of the actuator
• Compliance: ETL listed, UL 325 and UL 991
• Usage Classification: Class I, II, III, and IV vehicular gate applications
• Warranty: 42 months for residential or light commercial use
• Kit Configuration: 1 actuator arm, control enclosure with GOC-4000 board, two 7Ah batteries, actuator mounting brackets, control and power components, and associated installation hardware
• External Entrapment Protection: Required according to the gate layout and installation
• Photoeye: Not included unless otherwise specified with the selected package

Conclusion

The Platinum Access ACTP715-SK is intended for single swing gates that need a traditional linear actuator with battery-backed 24 VDC operation, adjustable obstruction sensing, soft start and stop, and optional solar capability. Its 700 lb and 15 ft published gate capacity make it suitable for residential entrances and compatible commercial vehicular gates.

For solar installations, the operator requires the appropriate solar regulator and a properly sized solar array rather than simply connecting a small maintenance panel. External photoeyes, sensing edges, or other entrapment protection devices should also be selected according to the actual gate geometry and applicable UL 325 requirements.