Platinum Access ACTP715-MSK Dual Swing Gate Operator Kit

Dual Linear Swing Gate Automation with Synchronized Gate Control

The Platinum Access ACTP715-MSK Dual Swing Gate Operator Kit is a linear actuator system for automating two residential or commercial vehicular swing gate leaves. It combines two ACTP715 actuator arms with a single GOC-4000 control system, providing synchronized primary/secondary operation from one controller.

Each actuator is designed for a gate leaf up to 700 lb and 15 ft long, with a maximum opening angle of 120 degrees and approximately 21-25 second travel time for a 90-degree opening. The 24 VDC continuous-duty brushed motors use soft start and soft stop, precision limit switches, and electronic obstruction sensing for controlled gate movement.

The GOC-4000 control board provides dedicated primary and secondary actuator connections and automatically synchronizes the two gate operators. An adjustable leaf delay of up to approximately 3 seconds can be used when one leaf needs to open or close before the other, such as on gates with an overlap, center stop, or magnetic lock.

Two 12V 7Ah batteries provide built-in 24 VDC battery backup during AC power loss. The system can also be configured for solar operation with the appropriate Platinum Access solar regulator and properly sized solar panels.

Key Features

• Dual swing gate kit with two ACTP715 linear actuator arms
• Supports gate leaves up to 700 lb and 15 ft each
• 24 VDC continuous-duty brushed motors
• Approximately 21-25 second travel time for a 90° opening
• Maximum opening angle up to 120°
• GOC-4000 control board with dedicated primary and secondary actuator connections
• Automatic synchronization of the two gate leaves
• Adjustable leaf delay up to approximately 3 seconds
• Soft start and soft stop for controlled gate movement
• Electronic reversing sensor with adjustable obstruction sensitivity
• Precision open and close limit switches
• Built-in 24 VDC battery backup with two 12V 7Ah batteries
• Adjustable automatic-close timer
• Supports inward- or outward-opening gate configurations when installed according to the manufacturer's geometry
• Keyed manual release on each actuator
• Advanced magnetic lock control
• Loop detector and external access-control connections
• Selectable fail-safe, fail-secure, and automatic-open-on-power-failure operation
• Optional solar operation with properly sized solar equipment
• Surge protection and alarm reset functions
• ETL listed and compliant with UL 325 and UL 991 requirements

Technical Specifications

• Manufacturer: Platinum Access Systems
• Model: ACTP715-MSK
• Operator Series: ACTP715
• Product Type: Dual linear swing gate operator kit
• Gate Configuration: Dual swing / bi-parting vehicular gate
• Number of Actuators: 2
• Maximum Gate Weight: 700 lb per leaf
• Maximum Gate Length: 15 ft per leaf
• Maximum Opening Angle: 120°
• 90° Opening Time: Approximately 21-25 seconds
• Motor Type: Brushed DC
• Motor Voltage: 24 VDC
• Motor Duty: Continuous duty
• Motor Operation: Instant reversing
• Control Board: Platinum Access GOC-4000
• Primary/Secondary Control: Single control board automatically synchronizes both actuators
• Leaf Delay: Adjustable up to approximately 3 seconds
• Primary Actuator Cable: 6 ft
• Secondary Actuator Cable: 40 ft
• Main Power Input: 100-240 VAC
• Selectable AC Input: 115/230 VAC, single phase
• Published Power Requirement: 120 VAC at 2 A or 220 VAC at 1 A
• Battery Backup: Built-in 24 VDC
• Included Batteries: 2 x 12V 7Ah
• Operating Temperature: -4°F to 158°F (-20°C to 70°C)
• Auto-Close Timer: Adjustable from approximately 3-60 seconds
• Obstruction Detection: Adjustable electronic reversing sensor
• Limit System: Precision mechanical limit switches
• Manual Release: Key release
• Solar Capability: Optional
• Solar Requirement: Minimum 80W solar capacity with appropriate Platinum Access solar regulator
• Actuator Weight: Approximately 40 lb each
• Actuator Length: Approximately 41 in
• Control Box Dimensions: Approximately 15.5 in H x 14.5 in W x 6.5 in D
• Control Box Weight: Approximately 28 lb with supplied batteries
• Control Box Location: Must be mounted within 5 ft of the primary actuator
• Compliance: ETL listed, UL 325 and UL 991
• Usage Classification: Class I, II, III, and IV vehicular gate applications
• Warranty: 42 months for residential or light commercial use
• Kit Configuration: 2 ACTP715 actuator arms, control enclosure with GOC-4000 board, 2 x 7Ah batteries, primary and secondary actuator wiring, actuator mounting brackets, power components, and associated installation hardware
• Photoeye: Not included unless specifically listed with the selected package
• External Entrapment Protection: Required according to gate geometry and installation

Conclusion

The Platinum Access ACTP715-MSK is the dual-gate configuration of the ACTP715 platform, providing two linear actuators, automatic primary/secondary synchronization, battery backup, and optional solar operation from one control system.

Each gate leaf must remain within the ACTP715's published 700 lb and 15 ft capacity. For overlapping bi-parting gates, the adjustable leaf delay allows the primary and secondary leaves to operate in the required sequence.

External photoeyes, sensing edges, or other entrapment protection devices should be selected according to the actual gate layout and applicable UL 325 requirements rather than assuming one safety device will cover every installation.