Seco-Larm SD-961A-36SLQ Illuminated Panic Bar

Illuminated Push-to-Open Bar for Controlled Door Egress

The SECO-LARM SD-961A-36SLQ Illuminated Push-to-Open Bar is an on-door egress device that triggers an external electric strike or maglock to release a secured opening from the protected side. It supports stand-alone operation or integration with an access control system, with customizable LED behavior, buzzer, and output timing for clear, controlled exit signaling.

Key Features

• Push-to-open egress control for doors secured by an electric strike or maglock
• Large status LED for quick visual confirmation (stand-alone red/green, controlled red/green/blue)
• Built-in buzzer with adjustable volume up to 92dB, plus optional relock warning behavior
• Standard dogging with hex key to hold the bar in the desired state
• Two non-latching (momentary) dual-contact switch sets with NO/NC/COM outputs for flexible wiring
• Cut-to-fit design for narrower doors (minimum length 23 5/8 inches)
• Important install notes: not weatherproof and not fire-rated

Technical Specifications

• Operating Voltage: 12 to 24 VDC
• Power Consumption: 180mA @ 12VDC, 140mA @ 24VDC (max.)
• Contact Load: ≤5A @ 230VAC
• Outputs: NO/NC/COM x2
• Trigger Time: 0.5 to 60 seconds adjustable, or dogged open
• Buzzer: Up to 92dB adjustable
• Door Width Fit: 36-inch doors (actual length 33 7/16 inches), minimum 23 5/8 inches
• Operating Temperature: 32°F to 150°F (0°C to 70°C)
• Overall Dimensions: 33 7/16 in x 2 3/8 in x 2 3/8 in (850 x 61 x 61 mm)
• Weight: 4 lb 10 oz (2.1 kg)

Conclusion

The SD-961A-36SLQ is a solid choice for controlled, on-door egress where clear status indication, adjustable timing, and dependable push activation are required for secured entries using strikes or maglocks. For best results, follow local code requirements and install only in protected interior locations since the unit is not weatherproof and is not fire-rated.