Doorking 9210-388 Slide Gate Operator (1-Horsepower)

DKS 9210-388 Slide Gate Opener 1HP

Requires 2 photoeyes to activate 

DKS 9210-388 is a slide gate opener with 1 horsepower motor, 230V, 3-phase with #50 chain. DKS 9200 Series Operators are designed for maximum security applications only – such as industrial locations, loading docks, factories, airport security areas, sea ports, etc. Because of the need to prioritize security in these applications, these operators are designed for fail-secure operation and require manual operation to open the gate in the event of a power outage. To enhance security, these operators feature an anti-tailgating circuit and an adjustable partial open feature to help prevent unauthorized vehicle access. In addition, speed controller options allow the user to adjust the gate speed from 1/2 ft/sec up to 4 ft/sec. An Emergency Close feature is available on some models which will close the gate at 4 ft/sec. This assures your security gate is open the absolute minimum amount of time necessary.

Features

• Direct driven limit nuts.
• Anti-tailgating feature.
• Adjustable mid-stop.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-secure operation includes crank for manual operation.
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

Specs

• Maximum gate length 100-feet.
• Maximum gate weight 2000 Lb. (#50 chain) / 3000 Lb. (#60 chain).
• Set speed 1 Ft./sec.
• 40:1 gear reduction running in a continuous oil bath.
• 1 HP continuous-duty motor.
• 115, 208, 230 VAC single-phase, 208, 230, 460 VAC three-phase (depending on 9210 model).
• Operator is shipped with chain brackets and 20-feet of #60 chain.
• Class III and IV applications only.
• ETL Listed

Important Notes

• Custom-made operator
• Not eligible for cancellation once ordered
• Requires 2 photoeyes to activate