Doorking 9220-389 Slide Gate Operator (2-Horsepower)

Doorking 9220-389 Slide Gate Opener 2-HP

DKS 9220-389 is a slide gate opener, 2-horsepower, 460V, 3-phase with #60 chain. DKS 9200 Series Operators are designed for maximum security applications only – such as industrial locations, loading docks, factories, airport security areas, sea ports, etc. Because of the need to prioritize security in these applications, these operators are designed for fail-secure operation and require manual operation to open the gate in the event of a power outage. To enhance security, these operators feature an anti-tailgating circuit and an adjustable partial open feature to help prevent unauthorized vehicle access. In addition, speed controller options allow the user to adjust the gate speed from 1/2 ft/sec up to 4 ft/sec. An Emergency Close feature is available on some models which will close the gate at 4 ft/sec. This assures your security gate is open the absolute minimum amount of time necessary.

Features

• Direct driven limit nuts.
• Anti-tailgating feature.
• Adjustable mid-stop.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-secure operation includes crank for manual operation.
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

Specifications

• Maximum gate length 75-feet.
• Maximum gate weight 2000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• Adjustable solid state speed control, 1/2 to 2 Ft./sec.
• Slow start / slow stop function.
• 30:1 gear reduction running in a continuous oil bath.
• 2 HP continuous-duty motor.
• 208, 230 VAC single-phase; 208, 230, 460 VAC three-phase.
• Operator is shipped with chain brackets and 20-feet of #60 chain.
• Class III and IV applications only.
• ETL Listed.

Important Notes

• Custom-made operator
• Not eligible for cancellation once ordered
• Requires 2 photoeyes to activate