Byan Systems 600A Gate Opener Arm (115 Volts)

Byan Systems 600-A Gate Opener Arm (115 Volts)

Note: Arm only! Control panel and accessories sold separately

Hybrid Residential / Commercial Hydraulic Operator. For gate leaf's up to 14 feet in length. Electric locks are recommended. The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty.

The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stops.

Specifications

• Model 600A: 115 VAC Single Phase Built-in Thermal Overload
• Capacitor Rating: 10 UF/ 35 UF/40 UF
• Standard Working Pressure: 1,650 PSI
• Maximum Working Pressure: 1,750 PSI
• Pump: Spur Gear .50 LTR/Min.
• Motor: 1/5 Horsepower
• Amperage Draw: 4 Amps
• Operator Length (with piston retracted and rear bracket and swivel joint installed): 714 mm (28-1/8 inches)
• Operator Length (with piston extended and rear bracket and swivel joint installed): 964 mm (37-15/16 inches)
• Operator Width: 3-3/8 x 3-3/8 inches
• Operator Height: 4-4/16 inches (w/lock cover)
• Speed to 90 Degrees: 18 Seconds
• Piston Stroke: 250 mm (9-7/8 inches)
• Operator Hydraulic Fluid Temperature Range: -40 to 180 Degrees F
• Hydraulic Fluid: Fuchs Aceite Multi-Temp
• Adjustable Pressure Setting in Both Open and Closed Directions
• Vertical Operation: NO
• Maximum Gate Leaf Weight: 2000 LBS