DOORKING 6003-080 SWING 110 VOLTS
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
DoorKing 6003 Single Swing Gate Opener
**110 VOLT. NOT FOR SOLAR APPLICATIONS**
**MUST HAVE AT LEAST 1 PHOTOEYE TO ACTIVATE**
The DKS residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design
Features
- 110V
- Internal adjustable limit switches.
- Slow start / slow stop.
- Overlap feature for dual swing gate operation.
- Magnetic lock output.
- Ports for plug-in loop detectors.
- Fully enclosed screw drive.
- 24 VDC operating power.
- Built-in battery back-up.
- Separate control panel.
- Keyed release for manual operation.
Specifications
- Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )
- Swings gate 90 degrees in approximately 16-seconds.
- Actuator operates at 24 Volts DC power.
- Class I applications.
- Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- *Dimensions (actuator only): 5"W x 5"H x 35 "L. These dimensions are at the widest part of the actuator. It tapers down to approximately 2-1/2" x 3".
DOORKING 6003-080 SWING 110 VOLTS
DoorKing 6003 Single Swing Gate Opener
**110 VOLT. NOT FOR SOLAR APPLICATIONS**
**MUST HAVE AT LEAST 1 PHOTOEYE TO ACTIVATE**
The DKS residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design
Features
- 110V
- Internal adjustable limit switches.
- Slow start / slow stop.
- Overlap feature for dual swing gate operation.
- Magnetic lock output.
- Ports for plug-in loop detectors.
- Fully enclosed screw drive.
- 24 VDC operating power.
- Built-in battery back-up.
- Separate control panel.
- Keyed release for manual operation.
Specifications
- Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )
- Swings gate 90 degrees in approximately 16-seconds.
- Actuator operates at 24 Volts DC power.
- Class I applications.
- Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- *Dimensions (actuator only): 5"W x 5"H x 35 "L. These dimensions are at the widest part of the actuator. It tapers down to approximately 2-1/2" x 3".
