Doorking 1508-195 Windshield Tags
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
Doorking 1508-195 Windshield Tags
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its
Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a
gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal,
the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside.
Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.

Doorking 1508-195 Windshield Tags
Doorking 1508-195 Windshield Tags
The Headlight TAG is designed to be used with the DKS 1815-350 Long Range Reader. The Tag does not contain a battery, so it never wears out.
The UHF long range antenna emits an RF signal which powers the Tag when the Tag enters the scanning area of the antenna. The Tag relays its
Wiegand number back to the antenna which reports the Tag’s number to a connected access control system. The Tag is an effortless way to open a
gate for an authorized vehicle.
Tag may be mounted on the headlight (BEST RECEPTION) or windshield NO closer than 2” away from any metal. The farther away from metal,
the better the reception. ONLY mount tag horizontally as shown. DO NOT mount tag vertically. It should be mounted out of the pathway of the windshield wiper blade when mounted outside.
Clear adhesive tape MUST be placed over the tag to protect it from weather and car washing.
