{"product_id":"all-o-matic-prime-vd2-plug-in-loop-detector","title":"All-O-Matic PRIME VD2 Plug-In Loop Detector","description":"\u003ch2\u003eVehicle Loop Detection with Real-Time Signal and Fault Diagnostics\u003c\/h2\u003e\n\u003cp\u003eThe All-O-Matic PRIME VD2 is a plug-in vehicle loop detector designed specifically for the All-O-Matic LPR-2 loop detector rack. Each detector monitors one properly installed in-ground inductive loop and provides the gate operator with a configurable solid-state output for Exit\/Free-Exit, Phantom, or Safety\/Reverse operation.\u003c\/p\u003e\n\u003cp\u003eThe PRIME VD2 gives installers more information than a basic loop detector. Its six-element LED bar graph displays loop signal strength in real time, while the seven-segment display shows settings, operating status, and diagnostic codes. Sensitivity can be adjusted while a vehicle is positioned over the loop, and the operating frequency can be changed to help prevent interference between detectors installed in the same rack.\u003c\/p\u003e\n\u003cp\u003eOpen-loop and shorted-loop fault codes help identify damaged, disconnected, or shorted loop wiring without relying on trial-and-error component replacement. The detector plugs directly into the LPR-2 rack and operates on 12 to 24 VDC power. This listing includes one PRIME VD2 detector module only. The LPR-2 rack and field-installed vehicle loop are sold separately.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-time visual diagnostics\u003c\/strong\u003e show loop response and signal strength during setup and operation\u003c\/li\u003e\n\u003cli\u003eSix-element LED bar graph with red, yellow, and green signal levels\u003c\/li\u003e\n\u003cli\u003eSeven-segment display shows settings, status, and loop fault codes\u003c\/li\u003e\n\u003cli\u003eAdjustable sensitivity helps match detection performance to the vehicle and loop installation\u003c\/li\u003e\n\u003cli\u003eAdjustable operating frequency helps reduce crosstalk between nearby detectors\u003c\/li\u003e\n\u003cli\u003eConfigurable normally open or normally closed solid-state detect output\u003c\/li\u003e\n\u003cli\u003eSupports Exit\/Free-Exit, Phantom, and Safety\/Reverse loop applications\u003c\/li\u003e\n\u003cli\u003eDisplays open-loop and shorted-loop diagnostic codes\u003c\/li\u003e\n\u003cli\u003eThree-button setup using UP, DOWN, and RESET controls\u003c\/li\u003e\n\u003cli\u003ePlug-in installation for the All-O-Matic LPR-2 loop detector rack\u003c\/li\u003e\n\u003cli\u003eLow-current 12 to 24 VDC operation\u003c\/li\u003e\n\u003cli\u003eOne-year limited manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e All-O-Matic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e PRIME VD2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Plug-in vehicle loop detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Compatibility:\u003c\/strong\u003e All-O-Matic LPR-2 loop detector rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop Capacity:\u003c\/strong\u003e One vehicle detection loop per detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Exit\/Free-Exit, Phantom, and Safety\/Reverse loops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement:\u003c\/strong\u003e 12 to 24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current Draw:\u003c\/strong\u003e 20 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetect Output:\u003c\/strong\u003e Solid-state\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Configuration:\u003c\/strong\u003e Normally open or normally closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree-Exit\/Phantom Setting:\u003c\/strong\u003e Normally open\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety\/Reverse Setting:\u003c\/strong\u003e Normally closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Display:\u003c\/strong\u003e Six-element LED bar graph\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar Graph Levels:\u003c\/strong\u003e Two red, two yellow, and two green LEDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus Display:\u003c\/strong\u003e Seven-segment LED display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e UP, DOWN, and RESET push buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-Loop Fault Code:\u003c\/strong\u003e OC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorted-Loop Fault Code:\u003c\/strong\u003e SC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One-year limited warranty against manufacturer defects and workmanship\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e One PRIME VD2 plug-in loop detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e LPR-2 rack, loop wire, and field-installed inductive loop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConclusion\u003c\/h3\u003e\n\u003cp\u003eOne PRIME VD2 detector is required for each active loop connected through the LPR-2 rack. A gate system using Exit, Phantom, and Safety loops can require three separate detector modules. When multiple detectors are installed in the same rack, each should be set to a different operating frequency to help prevent interference. Proper loop installation and sound field wiring are required for accurate vehicle detection and fault-free operation.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ca class=\"elite-button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/LPR-2_specs.pdf\" target=\"_blank\"\u003eCut Sheet\u003c\/a\u003e \u003ca class=\"elite-button\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/PRIME_VD2_manual.pdf\" target=\"_blank\"\u003eInstallation \/ User Manual\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Allomatic","offers":[{"title":"Default Title","offer_id":49220887380276,"sku":"PRIME-VD2","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/PRIME_VD2.jpg?v=1785346463","url":"https:\/\/elitegates.net\/products\/all-o-matic-prime-vd2-plug-in-loop-detector","provider":"Elite Gates","version":"1.0","type":"link"}