{"product_id":"aes-el00pm-rad-post-mount-vehicle-detector","title":"AES EL00PM-RAD Post Mount Vehicle Detector","description":"\u003ch2\u003eWireless Post-Mount Vehicle Detection for Gate Open Inputs\u003c\/h2\u003e\n\u003cp\u003eThe AES EL00PM-RAD Post Mount Wireless Vehicle Detection System is an e-LOOP vehicle detector designed for gate and door access applications where a post-mounted detector is preferred over buried loop work. It detects the presence and movement of vehicles using a 3-axis magnetometer with radar confirmation, then sends a wireless signal to a nearby compatible transceiver.\u003c\/p\u003e\n\u003cp\u003eThis detector is used for entry, exit, presence, and parking-style vehicle detection depending on setup mode and site configuration. It is commonly used with automatic gate systems where the controller has a dedicated open input and auto-close enabled. Once the detector identifies a vehicle, the paired transceiver can trigger the gate or door controller input.\u003c\/p\u003e\n\u003cp\u003eThe EL00PM-RAD mounts to a post approximately 23.6 inches, or 600 mm, above ground. Its compact enclosure, IP68 ingress protection, 128-bit AES encrypted radio communication, and lithium battery operation make it suited for outdoor access control environments where trenching, saw-cutting, or permanent in-ground loop installation is not practical.\u003c\/p\u003e\n\u003cp\u003eThis device is for vehicle detection and access input control. It is not a monitored entrapment protection device and should not be used as a substitute for required gate safety devices.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePost-mounted wireless vehicle detection system\u003c\/li\u003e\n\u003cli\u003eAES model EL00PM-RAD\u003c\/li\u003e\n\u003cli\u003ePart of the AES e-LOOP vehicle detection family\u003c\/li\u003e\n\u003cli\u003eUses 3-axis magnetometer vehicle detection\u003c\/li\u003e\n\u003cli\u003eRadar confirmation helps verify vehicle presence and movement\u003c\/li\u003e\n\u003cli\u003eDesigned for gate and door controller open-input applications\u003c\/li\u003e\n\u003cli\u003eSupports exit\/entry mode detection\u003c\/li\u003e\n\u003cli\u003eSupports presence mode detection\u003c\/li\u003e\n\u003cli\u003eParking mode available through supported mode configuration\u003c\/li\u003e\n\u003cli\u003eDefault EL00PM mode is exit mode\u003c\/li\u003e\n\u003cli\u003eUp to 3 m, approximately 9.8 ft., vehicle detection range\u003c\/li\u003e\n\u003cli\u003eUp to 50 m, approximately 164 ft., radio range\u003c\/li\u003e\n\u003cli\u003e433.39 MHz wireless communication\u003c\/li\u003e\n\u003cli\u003e128-bit AES encrypted radio security\u003c\/li\u003e\n\u003cli\u003eAuto-calibration support\u003c\/li\u003e\n\u003cli\u003eMagnet-based coding, calibration, mode change, and reset functions\u003c\/li\u003e\n\u003cli\u003eUp to 3-year battery life depending on daily activations and site conditions\u003c\/li\u003e\n\u003cli\u003ePowered by two 1.5V AA lithium batteries\u003c\/li\u003e\n\u003cli\u003eIP68-rated outdoor enclosure\u003c\/li\u003e\n\u003cli\u003eRated for operation from -40°F to 176°F\u003c\/li\u003e\n\u003cli\u003eQuick post-mounted installation with no saw-cut loop required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e AES Global\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel \/ Part Number:\u003c\/strong\u003e EL00PM-RAD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Post-mounted wireless vehicle detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e AES e-LOOP Post Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Technology:\u003c\/strong\u003e 3-axis magnetometer with radar confirmation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSampling Rate:\u003c\/strong\u003e 8 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Modes:\u003c\/strong\u003e Exit\/entry mode, presence mode, and parking mode where supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefault Mode:\u003c\/strong\u003e Exit mode for EL00PM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Range:\u003c\/strong\u003e Up to 3 m, approximately 9.8 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadar Read Distance Reference:\u003c\/strong\u003e Dead zone approximately 0.8 to 0.9 ft.; very high range approximately 3.2 ft.; high range approximately 6.5 ft.; maximum range approximately 9.8 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadar Angle Reference:\u003c\/strong\u003e Approximately 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio Range:\u003c\/strong\u003e Up to 50 m, approximately 164 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio Frequency:\u003c\/strong\u003e 433.39 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation:\u003c\/strong\u003e FSK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBitrate:\u003c\/strong\u003e 9.6 kbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBandwidth:\u003c\/strong\u003e 250 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Type:\u003c\/strong\u003e PCB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal Output Power:\u003c\/strong\u003e 10 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceive Sensitivity:\u003c\/strong\u003e -126.2 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadio Security:\u003c\/strong\u003e 128-bit AES encryption\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Source:\u003c\/strong\u003e Two 1.5V AA lithium batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Life:\u003c\/strong\u003e Up to 3 years depending on daily activations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Power:\u003c\/strong\u003e 14 µA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActivation Power:\u003c\/strong\u003e 35 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 6.9 in. H x 2.7 in. W x 1.1 in. D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.44 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Post mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Height:\u003c\/strong\u003e 23.6 in., 600 mm, above ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Hole Spacing Reference:\u003c\/strong\u003e Approximately 163 mm apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -40°F to 176°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Magnet-activated calibration with auto-calibration function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance During Calibration:\u003c\/strong\u003e Keep metal objects and vehicles clear of the detection area; manual references a 3.5 m clear radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController Requirement:\u003c\/strong\u003e Gate or door controller must have a dedicated open input and auto-close function enabled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"color: rgb(180, 12, 28);\"\u003eRequired Receiver \/ Transceiver\u003c\/span\u003e:\u003c\/strong\u003e Compatible AES e-LOOP transceiver required for wireless communication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance:\u003c\/strong\u003e Tested to CE approval\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Included:\u003c\/strong\u003e Gate operator, gate controller, monitored safety devices, mounting post, and external transceiver unless specifically included with the selected kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Do not mount near high-voltage cables because this can affect detection capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Note:\u003c\/strong\u003e For vehicle detection only; not a monitored gate safety or entrapment protection device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConclusion\u003c\/h3\u003e\n\u003cp\u003eThe AES EL00PM-RAD provides post-mounted wireless vehicle detection for gate and door access control applications that need a non-buried detector. Its magnetometer sensing, radar confirmation, encrypted wireless communication, IP68 housing, and battery-powered design make it useful for exit, presence, and access-trigger applications where the gate controller has a dedicated open input and auto-close enabled.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/EL00PM-RAD_specs.pdf\" class=\"elite-button\" target=\"_blank\"\u003eCut Sheet\u003c\/a\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/EL00PM-RAD_manual.pdf\" class=\"elite-button\" target=\"_blank\"\u003eInstallation \/ User Manual\u003c\/a\u003e\n\u003c\/div\u003e","brand":"AES","offers":[{"title":"Detector Only","offer_id":49193093529908,"sku":"EL00PM-RAD-1","price":469.99,"currency_code":"USD","in_stock":true},{"title":"Detector and Receiver","offer_id":49193093562676,"sku":"EL00PM-RAD-KIT","price":797.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0141\/9617\/8998\/files\/EL00PM-RAD.jpg?v=1784232715","url":"https:\/\/elitegates.net\/products\/aes-el00pm-rad-post-mount-vehicle-detector","provider":"Elite Gates","version":"1.0","type":"link"}