HyScurity SlideSmart CNX 15 Slide Gate Opener
- Slide Gate Operators
- Swing Gate Operators
- Parking Arms
- Solar Gate Operators
- Overhead Gate Operators
- Accessories
- Battery Back Up
- Belts - Rubber Motor Belts
- Card Readers
- Chain
- Circuit Boards
- Fire Dept. Access
- Gooseneck & Pedestals
- Hinges
- Keypads
- Loops
- Motors
- Maglocks
- Parts Department
- Photo Eyes
- Receivers
- Remote Controls
- Safety Edges
- Smart Gates Devices
- Solar Panels
- Switches / Keyswitches
- Telephone Entry Systems
- Timers
- Tools
- Transformers
- Wires
- Wheels
HyScurity SlideSmart CNX 15 Slide Gate Opener
Download Spec Sheet Download Manual
A fantastic solar capable slide gate operator (solar panels sold separately)
FEATURES
- Intelligent inputs take pulsed or 10K resistive sensors
- BlueBUS input
- Extended history event log
- 5 programmable digital inputs for sensors, detectors, or other access controls
- Dedicated inputs for dual gate and sequenced gates
- Toolless wire terminals
- 3 programmable relay outputs
- 4 Hy5B™ vehicle detector slots
- USB port for software updates and log files
- Nice OXI receiver
SMART CNX CONTROLLER
- The SmartCNX Controller combines decades of HySecurity experience with innovative technology in an intuitive, familiar interface. It features a bright OLED display for visibility in full daylight.
EXPANSION BOARD
- Provides 8 additional relay outputs and 8 additional digital inputs to cover the needs of the most complex installations.
ADDITIONAL FEATURES
- Solid state non-contact limit sensors
- Super quiet, super reliable direct drive gear train
- Locking covers prevents tampering and theft
- Covers are injection molded from high impact, fade resistant resin
- Tight fitting covers seal out rain and deters rodents and small pests
- Front cover access for service needs
- Two 8Ah batteries for up to 300 cycles on power loss. Optional upgrade to 35Ah batteries for solar applications.
CONNECTED TECHNOLOGY
- Integrated HyNet™ Technology provides remote management capabilities
- Remotely monitor the gate operator
- Remotely manage operator settings
- Control your HySecurity operator from your Security Platform
- Remotely update software to your operator
- Troubleshoot gate errors and faults
- Check cycle count
- Automatic notification of alerts and faults
SPECIFICATIONS
| Solar |
Solar ready for 12 - 36V
|
| Duty Cycle | Continuous |
| Travel Speed |
0.75 or 1 (23 or 30 cm/s) Open/Close speed set independently
|
| Gate Length | 50 ft (15 m) |
| Gate Capacity |
1,500 lb (680 kg)
|
| Operator HP | 1/2 hp |
| Drive Type |
Electromechanical - 24V Brushless DC motor with direct drive power train
|
| UPS Battery Backup Cycles |
Field configurable to fail open or secure when batteries deplete. Standard battery backup gate travel: Two 8Ah batteries. Up to 4,000 ft (1,219 m) after AC power loss. Extended battery backup gate travel: Two 35Ah batteries. Up to 18,000 ft (5,500 m) after AC power loss.
|
| Voltage Input |
Switch select 115V or 208-230V, 60/50 Hz; Solar input 12 or 24V solar panels
|
| Accessory Power |
24VDC at each input & SS relay (1A accumulative)
|
|
Temperature Rating
|
|
| Operating Voltage | 24VDC |
| Communication |
BlueBUS, USB, Ethernet, T4, RS-485, Bluetooth
|
| User Controls |
SmartCNX Controller with 70+ configurable settings. 32 character OLED display and 7 tactile buttons, or Bluetooth smartphone interface, for programming.
|
| Relays |
3 configurable user relays: Two - 30VDC, 3A solid state. One 250VAC, 10A electromechanical; Optional SmartCNX I/O Expansion
|
| App Class |
Usage Class I, II, III, IV
|
| Finish Type |
Zinc rich primer with black powder coated chassis. High impact copolymer cover.
|
HyScurity SlideSmart CNX 15 Slide Gate Opener
HyScurity SlideSmart CNX 15 Slide Gate Opener
Download Spec Sheet Download Manual
A fantastic solar capable slide gate operator (solar panels sold separately)
FEATURES
- Intelligent inputs take pulsed or 10K resistive sensors
- BlueBUS input
- Extended history event log
- 5 programmable digital inputs for sensors, detectors, or other access controls
- Dedicated inputs for dual gate and sequenced gates
- Toolless wire terminals
- 3 programmable relay outputs
- 4 Hy5B™ vehicle detector slots
- USB port for software updates and log files
- Nice OXI receiver
SMART CNX CONTROLLER
- The SmartCNX Controller combines decades of HySecurity experience with innovative technology in an intuitive, familiar interface. It features a bright OLED display for visibility in full daylight.
EXPANSION BOARD
- Provides 8 additional relay outputs and 8 additional digital inputs to cover the needs of the most complex installations.
ADDITIONAL FEATURES
- Solid state non-contact limit sensors
- Super quiet, super reliable direct drive gear train
- Locking covers prevents tampering and theft
- Covers are injection molded from high impact, fade resistant resin
- Tight fitting covers seal out rain and deters rodents and small pests
- Front cover access for service needs
- Two 8Ah batteries for up to 300 cycles on power loss. Optional upgrade to 35Ah batteries for solar applications.
CONNECTED TECHNOLOGY
- Integrated HyNet™ Technology provides remote management capabilities
- Remotely monitor the gate operator
- Remotely manage operator settings
- Control your HySecurity operator from your Security Platform
- Remotely update software to your operator
- Troubleshoot gate errors and faults
- Check cycle count
- Automatic notification of alerts and faults
SPECIFICATIONS
| Solar |
Solar ready for 12 - 36V
|
| Duty Cycle | Continuous |
| Travel Speed |
0.75 or 1 (23 or 30 cm/s) Open/Close speed set independently
|
| Gate Length | 50 ft (15 m) |
| Gate Capacity |
1,500 lb (680 kg)
|
| Operator HP | 1/2 hp |
| Drive Type |
Electromechanical - 24V Brushless DC motor with direct drive power train
|
| UPS Battery Backup Cycles |
Field configurable to fail open or secure when batteries deplete. Standard battery backup gate travel: Two 8Ah batteries. Up to 4,000 ft (1,219 m) after AC power loss. Extended battery backup gate travel: Two 35Ah batteries. Up to 18,000 ft (5,500 m) after AC power loss.
|
| Voltage Input |
Switch select 115V or 208-230V, 60/50 Hz; Solar input 12 or 24V solar panels
|
| Accessory Power |
24VDC at each input & SS relay (1A accumulative)
|
|
Temperature Rating
|
|
| Operating Voltage | 24VDC |
| Communication |
BlueBUS, USB, Ethernet, T4, RS-485, Bluetooth
|
| User Controls |
SmartCNX Controller with 70+ configurable settings. 32 character OLED display and 7 tactile buttons, or Bluetooth smartphone interface, for programming.
|
| Relays |
3 configurable user relays: Two - 30VDC, 3A solid state. One 250VAC, 10A electromechanical; Optional SmartCNX I/O Expansion
|
| App Class |
Usage Class I, II, III, IV
|
| Finish Type |
Zinc rich primer with black powder coated chassis. High impact copolymer cover.
|
