Cartell CW-SYS Wireless Loop (With Coax Cable)

Cartell CW-SYS Wireless Loop (With Coax Cable)

A wireless vehicle detection system for gates/home automation systems, triggered when a vehicles approaches the devise. This sensor can be installed in the driveway, beside the driveway, or on a post adjacent to the drive.

Powered by magnetometer technology with a sensitivity adjustment. It is only tripped by moving steel—not motion, heat, or pressure. No false alarm. Redundant two-way radio at 915MHz guarantees signal reaches the receiver.

Features:

• Installs in under 1 hour (on average) without the need for trenching
• No external transmitter/antenna
• Install sensor above ground on immovable object; in the ground; or in driveway
• Easily pair multiple sensors with multiple Integrators
• Reliable circuitry and filtering
• IP Rating: 68· Strength: 9-tons (8514 kgf)
• LoRA radio protocol at 915MHz
• Range determined by installation and obstructions to radio signal transmission
• Tested above ground: line of site, no obstructions, up to 2,500 feet (762 m)
• Tested flush with ground: line of site, no obstructions, up to 1,000 feet (305 m)
• 1-3 year battery life: CR123A (2)
• Sensor standby: 22 microamps (µA)
• Extra relay for low battery signal
• Short driveways: install in middle of the driveway and turn down sensor sensitivity
• Wide driveways: install multiple units in driveway (12 ft. apart) or on both sides

Components:

• Sensor puck
• Receiver
• Auger screws
• Batteries & clips
• Coaxial cable
• Terminal block screwdriver